DCT Welding Table at Essen Welding & Cutting Fair 2026: China 3D Welding Table Manufacturer
- Jun 30
- 8 min read
Updated: Jul 6
DCT Welding Table, a China-based manufacturer and supplier of modular 3D welding tables and fixturing systems, attended the Essen Welding & Cutting Fair in Shenzhen, China, from 29 June to 3 July 2026.
At the exhibition, DCT presented a complete range of 3D welding tables, positioning squares, quick-locking bolts, screw clamps, toggle clamps, stops, support blocks and modular welding fixtures.
Visitors were able to examine the welding tables and accessories closely, operate different clamping components and see how a modular welding table can be configured for different fabrication projects.
The exhibition allowed DCT to meet metal fabricators, welding professionals, equipment distributors and industrial buyers from China and international markets.
Who Is DCT Welding Table?
DCT Welding Table is a Chinese brand specializing in modular 3D welding tables, precision workholding systems and welding table accessories.
Our products are designed for metal fabrication companies that require:
Accurate positioning
Repeatable welding setups
Faster fixture changes
Flexible workholding
Improved production efficiency
Reliable support for different workpieces
DCT supplies welding table systems for workshops, factories, distributors, welding schools, robotic welding projects and industrial production lines.
Our objective is to provide customers with a complete modular solution rather than only a steel workbench.
A DCT welding table can be combined with clamps, stops, positioning rails, angle squares and quick-locking bolts to create different fixture arrangements for different components.
What Did DCT Display at the Essen Welding Fair?
The DCT exhibition area included complete welding table systems as well as individual accessories.
Visitors could see how different tools fit into the precision-machined holes on the tabletop and how they can be combined to hold steel plates, profiles, tubes, frames and fabricated components.
The exhibition display included:
Modular 3D welding tables
Large three-dimensional angle squares
Small positioning squares
Adjustable angle fixtures
Quick-locking bolts
Positioning pins
Screw clamps
Toggle clamps
Horizontal clamps
Vertical clamps
Slotted positioning rails
Stop blocks
Support blocks
Lifting eyes
Tool storage panels
Accessory holders
Displaying complete fixture combinations helped visitors understand how the DCT system works in actual welding and assembly applications.
China 3D Welding Table Solutions from DCT
DCT offers modular welding tables for customers looking for a dependable China 3D welding table manufacturer.
A 3D welding table normally includes working surfaces on the top and sides. These surfaces contain a regular hole grid that allows clamps and positioning accessories to be installed in many different locations.
This design gives fabricators greater flexibility than a conventional flat workbench.
Fixtures can be moved, removed or reconfigured according to:
Workpiece size
Welding angle
Product shape
Production quantity
Required clamping force
Welding sequence
Assembly method
This flexibility is especially useful for manufacturers producing multiple products or frequently changing fabrication jobs.
D16 and D28 Modular Welding Table Systems
DCT can provide different welding table systems according to the size, weight and complexity of the customer’s workpieces.
D16 Welding Table System
The D16 system is suitable for relatively small and medium-sized workpieces, including:
Stainless-steel products
Light steel frames
Cabinets
Enclosures
Furniture components
TIG welding projects
Small machinery parts
Prototype fabrication
D16 welding tables and accessories are compact and convenient for workshops that need precise positioning without using extremely heavy fixtures.
D28 Welding Table System
The D28 system is designed for medium and heavy fabrication applications.
Typical applications include:
Large steel frames
Machinery bases
Structural components
Heavy equipment parts
Large welded assemblies
Robotic welding fixtures
Industrial production lines
D28 accessories generally provide the strength and support needed for larger workpieces and more demanding fabrication projects.
The correct system should be selected according to workpiece dimensions, weight, required accuracy and production process.
Modular Welding Fixtures for Flexible Production
A major advantage of the DCT welding table system is modularity.
Instead of manufacturing a dedicated welding jig for every new product, operators can reposition the accessories on the table and build a new fixture arrangement.
For example, the same welding table may be used for:
Positioning a rectangular steel frame.
Holding a vertical plate at 90 degrees.
Clamping round or square tubing.
Supporting a cabinet assembly.
Positioning irregular metal components.
Preparing a repeated welding job.
Creating a temporary prototype fixture.
This can reduce fixture preparation time and make the workshop more adaptable to changing customer orders.
Quick-Locking Bolts for 3D Welding Tables
DCT quick-locking bolts are important connecting components within the modular welding table system.
They are used to secure accessories such as:
Angle squares
Stops
Positioning rails
Support blocks
Clamping bases
Adjustable fixtures
The locking bolts can be inserted into the welding table holes and tightened to hold the fixture in position.
The exhibition photographs show several quick-locking bolt designs, including versions with metal locking balls, knurled adjustment surfaces and optional operating handles.
These components allow operators to change fixture arrangements more efficiently than using conventional nuts and bolts.
Welding Table Clamps
DCT offers different clamp styles because one type of clamp cannot meet every welding requirement.
Screw Clamps
Screw clamps provide adjustable pressure and can be used to press a workpiece against the table, an angle square or a positioning stop.
They are suitable for:
Steel plates
Tubes
Profiles
Frames
Fabricated components
The operator can control the pressure by adjusting the threaded clamping mechanism.
Horizontal and Vertical Clamps
Horizontal and vertical welding table clamps allow the operator to apply pressure from different directions.
They help secure workpieces during:
Tack welding
Full welding
Assembly
Inspection
Position verification
Toggle Clamps
Toggle clamps are useful when workpieces must be loaded and unloaded repeatedly.
Once the clamp position has been set, the operator can open or close the clamp quickly using the handle.
This makes toggle clamps suitable for batch production and repeated welding operations.
Adjustable Welding Clamps
Adjustable clamps allow the height, reach and clamping position to be changed according to the workpiece.
They can be combined with other DCT welding table accessories to create a more flexible workholding system.
Welding Table Angle Squares
DCT welding table angle squares help position workpieces vertically or at defined angles.
Different sizes are available for different fabrication requirements.
Small Angle Squares
Small angle squares are suitable for:
Compact parts
Light fabrication
Small frames
Sheet-metal components
Short profiles
Large 3D Angle Squares
Large angle squares provide greater support for:
Tall steel plates
Large frames
Machine structures
Heavy welded assemblies
Long profiles
The holes and slots in the angle squares allow clamps and locking bolts to be installed in different positions.
Some angle fixtures can also be adjusted to hold components at angles other than 90 degrees.
Positioning Stops and Slotted Rails
Positioning stops create repeatable reference points on a welding table.
Once a stop has been installed, operators can place multiple workpieces against the same reference position.
This can help maintain consistency when manufacturing repeated components.
Slotted positioning rails provide additional adjustment. The locking bolt can move along the slot before being tightened, allowing the operator to fine-tune the fixture position.
These accessories are useful for:
Repeated batch production
Frame alignment
Length positioning
Edge positioning
Component spacing
Workpiece inspection
Why Use a Modular 3D Welding Table?
A modular welding table gives the operator more control over workpiece positioning before and during welding.
Important benefits include:
Faster Setup
Fixtures can be installed directly into the table holes without manufacturing a completely new jig for every job.
Repeatable Positioning
Stops and squares can remain in fixed positions, allowing multiple workpieces to be placed in the same arrangement.
Flexible Configuration
The system can be changed for different workpiece sizes, shapes and welding angles.
Improved Organization
Accessories can be stored on a tool panel near the welding table, making them easier to find and use.
Support for Three-Dimensional Workpieces
Fixtures can be installed on the top and side surfaces of a 3D welding table.
Suitable for Manual and Robotic Welding
The table can be used for manual fabrication or as part of a robotic welding fixture system.
Applications of DCT 3D Welding Tables
DCT welding tables can be used in many industries and fabrication environments.
Common applications include:
Metal fabrication
Sheet-metal manufacturing
Steel furniture production
Machinery manufacturing
Automotive component production
Stainless-steel fabrication
Railings and gates
Cabinet manufacturing
Agricultural machinery
Construction equipment
Industrial frames
Robotic welding
Welding schools
Research and development
Prototype production
Customers can select table dimensions and accessories according to their products and production requirements.
Nitrided Welding Tables
For customers requiring improved surface performance, DCT can provide welding tables and accessories with suitable surface treatment options.
A plasma-nitrided welding table is designed for demanding industrial environments where the working surface is regularly exposed to:
Welding spatter
Clamps and fixtures
Steel workpieces
Repeated loading
General workshop wear
The required table material, surface treatment and accessory configuration should be confirmed according to the customer’s application.
Custom 3D Welding Tables from China
DCT can discuss customized welding table solutions for international customers.
Customization options may include:
Table length
Table width
Table height
Hole system
Hole spacing
Side-wall height
Leg configuration
Adjustable feet
Casters
Surface treatment
Accessory packages
Clamp combinations
Positioning components
Packaging requirements
Customers are encouraged to provide drawings or photographs of their workpieces.
Useful information includes:
Maximum workpiece length
Maximum workpiece width
Maximum workpiece height
Workpiece weight
Material type
Welding method
Required production quantity
Required positioning accuracy
This information helps DCT recommend a suitable welding table and fixture package.
DCT Welding Table for International Buyers
DCT works with customers searching for a 3D welding table supplier in China.
We welcome enquiries from:
Metal fabrication companies
Welding equipment distributors
Machinery dealers
Importers
Factory owners
Production engineers
Welding automation companies
Robotic welding integrators
OEM partners
Customers can purchase welding tables, complete accessory packages or individual replacement fixtures.
Export packaging and international shipping arrangements can be discussed according to the destination country and order size.
Meeting Customers at the Essen Welding & Cutting Fair
The Essen Welding & Cutting Fair gave the DCT team an opportunity to communicate directly with customers and industry professionals.
Visitors were especially interested in:
The differences between D16 and D28 systems
Quick-locking bolt operation
Table size selection
Welding table flatness
Surface treatment
Clamp selection
Accessory compatibility
Custom fixture design
Export packaging
Distributor cooperation
The photographs from the fair show visitors examining the accessories, comparing different angle squares and discussing fixture combinations with the exhibition team.
These discussions help us understand the real requirements of welding workshops in different industries and countries.
Why Choose DCT as Your China 3D Welding Table Supplier?
Customers choose a welding table supplier based on more than price.
The table and accessories must work together as a complete system.
DCT focuses on:
Complete modular welding table solutions
Multiple table sizes
D16 and D28 system options
Broad accessory selection
Flexible fixture combinations
International supply
Customized configurations
Practical product recommendations
Export packaging support
Long-term distributor cooperation
Our goal is to help customers build a welding setup that matches their actual production requirements.
Frequently Asked Questions
What is a 3D welding table?
A 3D welding table is a precision workbench with regularly arranged holes on the tabletop and side surfaces. Clamps, angle squares, stops and other fixtures can be installed in these holes to position workpieces during welding and assembly.
Who manufactures DCT welding tables?
DCT Welding Table is a China-based supplier and manufacturer of modular 3D welding tables, clamps, positioning accessories and welding fixture systems.
Where are DCT welding tables made?
DCT welding tables are manufactured in China and supplied to domestic and international customers.
Does DCT supply D16 and D28 welding tables?
Yes. DCT supplies D16 and D28 modular welding table systems for different workpiece sizes and fabrication requirements.
What accessories are available for a DCT welding table?
Available accessories include quick-locking bolts, screw clamps, toggle clamps, angle squares, stops, positioning rails, support blocks, adjustable fixtures and lifting components.
Can DCT customize a welding table?
Yes. Table dimensions, height, legs, surface treatment and accessory packages can be discussed according to the customer’s workpiece and production process.
Can a 3D welding table be used for robotic welding?
Yes. Modular welding tables can be used to build repeatable workholding setups for manual welding and robotic welding applications.
How do I select the correct welding table size?
Select the table according to the maximum workpiece dimensions, weight, welding process, working height and required fixture arrangement. Customers can send their workpiece drawings to DCT for evaluation.
Does DCT export welding tables?
Yes. DCT welcomes enquiries from overseas factories, distributors, machinery dealers and welding automation companies.
Visit and Contact DCT Welding Table
DCT would like to thank everyone who visited our welding table display during the Essen Welding & Cutting Fair in Shenzhen from 29 June to 3 July 2026.
For prices, technical details, product catalogues or distributor cooperation, please contact the DCT team.
Contact Precision Welding Table Today
WhatsApp: +86-180-2874-2690
A DCT precision welding table can help your workshop improve accuracy, reduce setup time, and make welding production more efficient. Contact us today to get the best welding table solution for your project.
Comments